Loading...
Serving Kingman, AZ and surrounding areas. (928) 352-0547
Kingman Asphalt Paving handles asphalt paving, driveway installation, sealcoating, and repairs in Mohave Valley, AZ. We have served this area since 2016, and we know the sandy soils near the Colorado River, the caliche hardpan further east, and the drainage demands that monsoon season puts on every paved surface out here.
Mohave Valley properties sit on a mix of sandy floodplain soils near the river and harder caliche ground further east - both require specific base preparation before a new surface goes down. Our asphalt paving work starts with a proper soil assessment so the base is built right for the ground underneath your specific lot.
Many Mohave Valley homes are on larger desert lots with long, unpaved or chip-seal drives that turn to dust and washboard in summer heat and wash out at the edges during monsoon rain. A properly paved driveway with graded drainage eliminates those seasonal problems and handles the heat that reaches well above 110 degrees in this part of the valley.
Mohave Valley gets over 300 sunny days a year, and that relentless UV exposure dries out and cracks asphalt faster than most property owners expect. Sealcoating every 3 to 5 years is the most cost-effective way to protect your pavement investment in this climate and keep the surface from deteriorating ahead of schedule.
Once the surface binder oxidizes and cracks open, monsoon water gets into the base below and turns small surface cracks into large structural failures. Crack sealing, done before the next monsoon season, stops that water infiltration and extends the life of pavement that is still structurally sound underneath.
Mohave Valley's flat, sandy terrain near the Colorado River does not shed water naturally, and heavy monsoon rain can pool against foundations and undercut gravel or asphalt surfaces in a single storm. Proper drainage grading built into every paving project keeps water moving away from structures and off paved surfaces where it belongs.
Potholes in Mohave Valley driveways and parking areas typically start as small surface cracks that monsoon water enters and widens through repeated wet-dry cycles on sandy or caliche soil. Patching them with properly compacted hot-mix asphalt - not just cold-patch filler - stops the damage cycle and keeps surfaces level and safe.
Mohave Valley is an unincorporated community spread across wide desert lots in the far western corner of Arizona, right along the Colorado River. The soil here is not uniform: land near the river sits on sandy, alluvial floodplain soils that drain well but shift under load and moisture changes, while properties further east encounter caliche hardpan just below the surface that stops a shovel cold. Both soil types require different base preparation approaches before any asphalt goes down. A contractor who does not account for the soil under your specific lot is setting up premature failure.
Add to that the summer heat, which regularly climbs past 110 degrees and can push toward 120 degrees during heat waves in this low-elevation desert corridor. Asphalt mixes not formulated for extreme heat will soften and rut in the first hot season. Then the monsoon arrives in July and August - sudden, heavy rain on hard desert soil that cannot absorb water quickly. Runoff pools fast, and if a driveway or parking area was not graded with drainage built in, that water undermines the base from below. Mohave Valley demands specific knowledge of all three of these factors: soil type, extreme heat, and monsoon drainage - and the work has to account for all of them.
Our crew works throughout Mohave Valley regularly, and we understand the local conditions that affect asphalt paving work here. US Highway 95 runs north through the community toward Bullhead City and is the primary corridor most residents know well - properties on the west side of the highway tend to sit on lower, sandier ground closer to the river, while parcels on the east side are more likely to have caliche issues when we dig. Many homes here are manufactured houses on large, spread-out lots with long unpaved or gravel driveways, and the paving needs for those properties are different from a typical suburban lot. For permits and code questions, Mohave Valley falls under Mohave County jurisdiction rather than any city department.
We cover the full Mohave Valley service area and extend north through Fort Mohave and all the way to Bullhead City on one side, and west across the river toward Needles, CA on the other. If your property is in this stretch of the Colorado River valley, we are familiar with the area and can reach you without a long wait.
We respond within one business day. Tell us your address and a description of the project - driveway, parking area, repair, or sealcoating - and we will schedule a free on-site visit at a time that works for your schedule.
We assess your soil conditions, existing surface, and drainage before we write a single number. Your written quote specifies asphalt thickness, base depth, any grading or drainage work included, and total cost - no hidden items.
We excavate to stable subgrade, address any caliche or sandy soil issues, grade for proper drainage, compact the base, and install the asphalt. Most residential driveway jobs in Mohave Valley are complete in one day on site.
We walk you through curing time for your specific job - usually 24 to 48 hours before vehicle traffic in cooler weather, and the full 48 hours during summer heat. We also note when sealcoating should be scheduled to protect the new surface.
We serve Mohave Valley and the surrounding Colorado River valley. No pressure - just a straight answer on what your driveway or paving project needs.
(928) 352-0547Mohave Valley is an unincorporated community in Mohave County, Arizona, situated along the Colorado River in the far western corner of the state. The area has no city government of its own - residents deal with county services and county-level permitting through the Mohave County offices in Kingman. The community stretches across wide, spread-out desert terrain, with US Highway 95 as the main north-south corridor connecting it to Bullhead City to the north and other Arizona communities to the south and east. The Colorado River and its floodplain form the western boundary, separating Arizona from Needles, California and the rest of the Mojave Desert on the California side.
The housing stock in Mohave Valley leans toward manufactured and older site-built homes on larger desert lots, many developed through the 1970s, 1980s, and 1990s. The community includes a mix of long-term residents, retirees, and seasonal residents who spend winters in the mild desert climate. Many homes sit on sizeable parcels with gravel yards, unpaved driveways, and minimal landscaping - properties well suited to asphalt paving improvements that reduce dust and maintenance. Residents in Mohave Valley often work or shop in nearby Bullhead City or cross the river to Laughlin, NV, and both those communities are part of our regular service coverage as well.
Keep your lot organized, safe, and compliant with fresh line markings.
Learn MoreSeal cracks early to prevent costly water intrusion and pavement failure.
Learn MoreLarge-scale commercial paving completed on schedule and within budget.
Learn MoreRestore worn pavement with a fresh surface layer at a fraction of replacement cost.
Learn MoreProper grading and excavation for stable, well-draining pavement foundations.
Learn MoreDurable concrete curbs and sidewalks that define and protect your property.
Learn MoreProfessionally installed speed bumps that improve safety in any lot.
Learn MoreDriveways, parking areas, crack sealing, and sealcoating - we cover all of Mohave Valley and respond within one business day.